Looking for a way to protect your basement from flooding? Well, you have come to the right place. What could be better than a sump pump from a reputed and sincere manufacturer?
In our Wayne sump pumps reviews, we will analyze some of the best Wayne sump pumps in the market. For you to get a better sense of comparison and to make a good decision, a detailed discussion is a must. We know how tiring it can be to surf the net the whole day to find important information about sump pumps and then to compare among them.
But don’t worry. Here you will find a separate review section for each of these Wayne pumps with our final opinion regarding them. We have gone through a hip of reviews on Amazon to show you the real picture.
So, without wasting any more time let’s dive in.
Table of Contents
Wayne Sump Pumps Reviews: CDU980E, CDU800E, WSS30VN, ESP25
Wayne pumps are ruling the sump pump industry for over 80 years. They have gained their customer’s trust by innovating so many pumps over the years to improve the water solution system of an average house.
Today we have picked the four most promising Wayne pumps: CDU980E, CDU800E, WSS30VN, ESP25. All four pumps are different in their characteristics, price, and purpose.
But before we jump into our main Wayne sump pump reviews, let’s have a close look at their basic comparison.
|Sump Pump Model/
|Motor capacity||¾ HP||½ HP||½ HP+ 12-volt backup||12-volt|
|Flow rate||5490 GPH||4200 GPH||5100GPH+2900 GPH||2900 GPH|
|Dimension||8x8x12 inches||9x9x12 inches||23.5×18.25×14 inches||17×10.5×14 inches|
|Weight||12 pounds||17.8 pounds||45 pounds||13 pounds|
Our first sump pump for today’s discussion will be the Wayne CDU980E. If you have researched even a little bit about sump pumps, you must have heard this name. You can say it is quite popular due to providing unparalleled service and having a reputed brand name.
Let’s talk about build quality first. This unique pump is made of stainless steel and cast iron. Both are extremely strong and make the pump last longer than usual. Cast iron helps to reduce the overheating tendency of the pump. Overheating can severely damage the internal parts of your pump. Thankfully, the CDU980E has the elements to transfer heat into the water and keep the operation cooler.
As for stainless steel, it contains 10% Chromium that enables it to fight corrosion or rust. Also, it is easier to clean and looks more aesthetic. It can stay in shape even if the temperature is high.
The next feature is its power. This ¾ HP submersible pump can flush out 4600 gallons per hour. The capacity is really powerful for this horsepower. Besides, the top suction design of the impeller draws water from the top of the cast iron bottom. The impeller avoids sucking up only the mud or rubbish.
Plus, it doesn’t wait to start until the whole pump is underwater. As soon as the pre-determined level is crossed by the water, the pump activates automatically. Moreover, the CDU980E features a float guard protected vertical switch for turning on the pump smoothly.
Here is a piece of advice. Use firm fittings while locking the pump to the sump basin. It will lessen the movement in the pit. We suggest you examine the pit at least 3 times a year. If you find any debris clogging into the pump, just remove it. And don’t install the pump until you are sure that all the parts are intact or fit.
- It comes with a 5-year manufacturer’s warranty.
- The top suction impeller design reduces clogging.
- The construction material is strong and durable.
- It has a lot of reliable reviews on amazon.
- It pumps water quietly and quickly.
- All the parts are from the USA.
- Many customers have found the manufacturer’s warranty not so reliable.
- The floater mechanism of the pump that helps to activate it needs improvement.
The advantages definitely outgrow the disadvantages. This amazing pump surely deserves your serious look.
The next one is the Wayne CDU800E ½ HP Submersible Sump Pump. The cast iron volute and steel body have made this pump tough and solid. Since the pump is a submersible one, it needs to stay inside water a lot. That requires extra corrosion-resistance.
Luckily, the CDU980E has that protection along with thermal protection and abrasion resistance. Overheating is the root cause of various types of pump failures. However, this little beast is outfitted with sensors that can precisely detect the temperature rise.
As soon as the pump starts to overheat due to excessive working, these sensors trigger the pump to shut down immediately. This action eventually benefits your sump pump in the long run. One customer reported that it survived a 5-day nonstop rain during a Hurricane.
Another great feature is that the motor is oil-filled. Oil-filled motors are more efficient than water or air-filled ones. Oil has more heat conductivity too. This quality helps the pump to stay cooler by reducing hot spots or red spots. Plus, you won’t have to lubricate the pump often. The oil will take care of the inner parts of the motor and keep them away from rusting. Isn’t it great that it saves your maintenance time?
The ½ HP pump motor can remove 5100 gallons per hour from the pit. Moreover, this pump doesn’t require much space to fit into the sump pit. If your sump pit has at least 11 inches diagram your pump can operate comfortably.
As for other features, the CDU800E offers you a reinforced polycarbonate impeller and ceramic seal to stop leakage. Polycarbonate is considered as close to indestructible. That means the impeller can take more abuse of the debris and rocks without losing efficiency.
- It is greatly known for its super quiet service.
- The pump is outfitted with thermal protection.
- It has 4.7 stars out of 5 stars on Amazon.
- The price is reasonable for a powerful pump like this.
- It comes with a 3-year warranty from the manufacturer.
- It is made in the USA.
- Some customers found the top of the pump a bit flimsy.
- The whole pump is not made of cast iron.
This pump works pretty well and stands up to your expectation. Just don’t try to overkill it with an excess load of water. Also, using quality check valves will surely increase its ability.
How would you feel if you have to clean up a flooded basement because your pump failed? Horrible, we know. But that’s a reality for those who only have an AC powered primary sump pump installed in the sump pit. No matter how solid the pump is, it is gonna back off as soon as the power is gone.
Don’t worry. For situations like that Wayne has introduced their lifesaving pump; the WSS30VN upgraded combination ½ HP and battery backup system. The eye-catching benefit of this pump is that it comes with a DC powered backup system for emergencies. Let’s get to know this wonderful pump a little more.
The whole pump is made of solid cast iron. No more cheap plastic design to ruin the strength. No doubt the pump guarantees to last longer. The pumping capacity of the ½ HP main pump is 5100 GPH. And the 12-volt backup system can pump 2900 GPH. The pump comes with three rubber couplings to prevent the noise from getting into the pipes. And you get a peaceful sleep without any disrupting sound from the basement.
The best thing is you get protection whenever you need it. If the main pump faces difficulty due to a heavy load of water, the backup pump kicks off and extends a helping hand. Thus, no matter what you get a bone-dry basement.
Though the pump has many benefits, it is not immune to cons. Customers find the battery status very poor. The company should really work on it to make it more helpful. However, apart from these few disadvantages, the pump will surely pay you off. Also, note that you will need deep cycle marine batteries to operate the backup system.
- The float switch is tested to 1 million cycles before leaving the factory.
- All parts are imported from the USA.
- It can work even during a power cut.
- It comes with a manufacturer’s warranty.
- It has 4.6 out of 5 stars on Amazon.
- The price is also fair. It would surely cost you more to buy the two pumps separately.
- Batteries are not included in the package. You have to buy it separately.
- This kit also doesn’t include a check valve.
- The battery box needs improvement.
You should definitely give a thought to this pump if you have previous experience of power cut during rainstorms.
This smart backup system was manufactured to help homeowners having frequent power-cut issues. Now, you might already notice that it is the same pump from our previous upgraded combo pack. So, if you already have a primary sump pump installed in the pit and need more protection, this is the way to go.
The pump is fully made of rugged cast iron. You get a tough pump that can handle water emergencies perfectly without affecting its strength. For extra protection, an epoxy outer layer is painted. This layer strengthens the guard against corrosion or rust or heat. An epoxy layered pump can stay in shape longer than other pumps while working at high temperatures. This pump has a capacity of 2700 GPH. It is satisfactory for a backup system.
Plus, there are other useful features like an alarm, notifying system, and an LED display. Whenever the backup gets activated, you receive a notification. The display will let you know about the inner condition of the pump without opening it up. For instance, if the light is green, it means the battery is charged.
You have to be careful while buying the batteries. Look for size 27 deep cycle marine batteries in the Walmart or box stores. Then connect the batteries parallelly, and you are good to go. Wayne especially recommends the Wayne Wsb1275 75amp hour battery.
Customers reported that the installation was so easy that you actually don’t even need the manual.
- The wiring hook-up is pretty easy.
- It can pump 10000 gallons on a single charge.
- The top suction design of the impeller ensures a smoother rotation.
- It has 4.6 out of 5 stars on Amazon.
- A LED display is attached to let you know the battery status.
- You might require an extension cord.
- It doesn’t come with a battery. You have to buy it separately.
Next time your house loses power, don’t be afraid. You have around 10 days-worth of drainage.
Since you have reached the end of this Wayne sump pump reviews, you might have selected the right one. But if you haven’t, that’s completely fine. It is natural to be confused or hesitant while choosing the best sump pump for your house. After all, it is a big investment.
So, here is our final opinion. Hope it helps you.
The Wayne CDU980E is the top pick for a ¾ HP motor. All its features represent top-notch quality and the brand’s reputation. But if your need is more than ¾ HP, you can go for the CDU800E. It has a ½ HP motor with splendid features. But keep in mind that the bigger is not always better. And it is especially true for sump pumps. If your basement water level is not high enough for a ½ HP, the CDU800E will be a total waste. It will run dry and shut down eventually.
Now, our top recommendation for you is the Wayne WSS30VN. It is a bit pricey but the reason is understandable. It offers you two pumps: a ½ HP AC powered pump and a 12-volt backup. You get a total capacity of (5100+2900) 8000 GPH. It will strongly protect your basement.
As for the ESP25 pump, it is useful if you already have a pump. It can be a Wayne pump or any other brand. For people who are very much cautious about their house’s safety, this pump can give you an extra sense of security.